Vertical Machining Center VMC7035

Technical parameters	Content	Unit	VMC3020	VMC5030	VMC7035	VMC7040	VMC850
Workbench	Table size(L*W)	mm	420x180	630x280	950x350	900x400	500x1000
	Axis (X/Y/Z)	mm	240x160x180	500x280x400	650x350x500	700x400x550	850x500x500
	Maximum table load	kg	150	300	400	400	600
T-slot	Number/width/spacing	mm	3-12-60	3-14-80	3-14-100	3-18-140	5-18*100
Main shaft	Spindle taper		MT3	BT30	BT40	BT40	BT40
	Spindle center to column surface distance rail	mm	240	395	416	460	592
	Spindle nose to table distance	mm	90-270	100-500	150-650	150-700	150-700
	Spindle speed range	rpm	80-1400	100-8000	100-8000	100-8000	100-8000
	Motor Power	kw	1.5	2.2	3.7/5.5	5.5/7.5	7.5/11
Feed rate	Rapid traverse speed X/Y/Z	m/min	6	12/12/6	18	18	15、15、12
Feed rate	Feed movement speed X/Y/Z	m/min	4	6/6/3	8	8	8
Accuracy	Positioning accuracy	mm	0.02	0.015	0.015	0.015	0.012
Accuracy	Rrpeat positioning accuracy	mm	0.01	0.0075	0.0075	0.0075	0.008
Magazine	Capacity			6T	12T	12T	24T
	Maximum tool diameter	mm		120	100	100	150
	Maximum tool weight	Kg		6	8	8	8
General paramenters	Machine weight	Kg	850	2100	3300	4500	5500
General paramenters	Dimensions	mm	1200x1050x1650	1900x1800x1900	2290x1805x1900	2400x2000x2550	2400x2450x2350